Sms Communicator. Download32 is source for sms communicator shareware, freeware download - Headwind SMS Communicator, SmartReminder, Oxygen SMS Gateway, Atelier Web SMS Pro, SMS Express 2007, etc. SMS and communication settings. Serial port settings. Before connecting to the GSM modem, a serial port must be configured. If the SIM card requires the installation of a SMSC number or entering a PIN code, enter them in appropriate edit.

I have setup the virtual serial port, but the Headwind GSM modem driver shows the bubble tip 'File not found'

The port name seems to be not configured. Disconnect the modem, configure the port name and try again. See instructions on the configuration of a virtual serial port.

I have setup the virtual serial port, but the Headwind GSM modem driver hangs up on connect, or shows the bubble tip 'Access denied'

Check that you do not need to confirm the connection from the modem's side and confirm the connection if necessary. There may be also an error in a virtual serial communication (for example, the Bluetooth key was expired). In this case, break the virtual serial communication and reconnect it.

When I try to send SMS, Headwind GSM modem driver immediately reports an error

Probably the automatic configuration of the model was failed. Open the control panel, select the 'Properties' tab and uncheck the 'Auto-detect' checkbox. Then switch the the 'SMS' tab and setup the sending mode manually.

You can simply remove unwanted speckling and grain in your photos using Adobe Noise Reduction pack of the app.The good news is that just by signing up to your Adobe account, you get access to all the premium features for free.2.It is one of the best and popular photo editor that employ a completely different way of editing the photos. It’s uncommon method of editing the photos let you see the large previews which make image editing joyful.You can use the quick interactive editing feature for the best possible level of accuracy and control. The application provides very simple and user-friendly interface so that users can edit the photos in a right way.

Check that the recipient number is in proper format. The most common format is the so-called 'international' format (the number begins with the prefix '+' followed by the country code). Set the format manually to 'unknown' if you are not sure.

Headwind GSM modem driver does not notify me about incoming SMS

Check that bubble tips are allowed and handled SMS are saved ('Application' tab in the control panel). Some devices do not support notification. In this case, set the read mode manually to 'Polling' (see above how to setup the modem manually). Some devices may not give access to incoming WAP Push messages.

Serial port settings

Before connecting to the GSM modem, a serial port must be configured. Normally, the serial port is configured automatically using the connection wizard. This wizard is called by clicking the appropriate button. The serial port name may be also selected manually in an appropriate combo box. If the serial port requires additional settings (baud rate or custom initialization commands), setup these values in appropriate combo boxes below.

The 'Timeout' edit box contains the timeout in seconds for waiting a reply from the modem. The appropriate value for the timeout is 10-30 sec.

If the SIM card requires the installation of a SMSC number or entering a PIN code, enter them in appropriate edit fields.

SMS settings

The SMS settings must be used only if a manual configuration of the modem is chosen ('Auto-detect' checkbox in the 'Properties' tab). Normally, these settings (except the deleting mode) are disabled and you should not change them.

• Sending mode - text mode or PDU mode. The default mode is the PDU mode, when you can send SMS containing UNICODE letters and WAP-Push messages. The text mode allows you to send only short messages containing ASCII symbols.
• Send SMS through device memory - some mobile phones (for example, Motorola) require this option to send SMS.
• Receive mode - how to handle incoming SMS. The available options are: notification by content (the modem directly sends the SMS content to the PC), notification by index (the modem sends the index of a message in the modem memory), polling (Headwind GSM modem driver asks the modem for new messages periodically) and ignoring new SMS. The polling must be used only if the modem does not support notification.
• Delete incoming - you can tell the modem to delete all SMS after receiving, delete only received SMS, or do not delete incoming SMS. Please note that not all modems support deleting all SMS.
• Polling memory type - indicate the memory used for polling (SIM card or phone memory). This parameter must be set only if the polling mode is chosen. It is recommended to check where the modem saves received SMS by listing the phone memory.
• Polling time - time in seconds before requests for new SMS in a polling mode. The recommended value is 30-300 sec.
• Delete SMS after - you can send the deleting command to the modem after some SMS are received. This option is enabled only if the 'Delete All' option is chosen.
• Decode USSD replies - this option may be used to adjust encoding of USSD replies. Use it if the modem replies to USSD with digits or in other strange form.

To setup SMS sendings manually, you can also unset the flag 'Select optimal settings automatically'.

Buttons

There are 'Send SMS', 'Connect' and 'View log' buttons. Before sending a message, the modem must be connected. The 'View log' button opens the modem log in a text editor. Use this log to make diagnostics in the case of errors.